Product Code:SAE J2842
Title:R-1234yf and R744 Design Criteria and Certification for OEM Mobile Air Conditioning Evaporator and Service Replacements
Issuing Committee:Interior Climate Control Vehicle Oem Committee
Scope:The intent of this standard is to establish a framework to assure that all evaporators for R-744 and R-1234yf mobile air conditioning (MAC) systems meet appropriate testing and labeling requirements. SAE J639 requires vehicle manufacturers to perform assessments to minimize reasonable risks in production MAC systems. The evaporator (as designed and manufactured) shall be part of that risk assessment and it is the responsibility of the vehicle manufacturer to assure all relevant aspects of the evaporator are included. It is the responsibility of all vehicle or evaporator manufacturers to comply with the standards of this document at a minimum. (Substitution of specific test procedures by vehicle manufactures that correlate well to field return data is acceptable.) As appropriate, this standard can be used as a guide to support risk assessments.With regard to certification, most vehicle manufacturers have established formal production part approval processes (PPAP) where compliance certification is established and formally documented. For an evaporator manufacturer of non-original equipment parts (or a vehicle manufacturer that does not have a formal part compliance certification process) then the certification described in this standard is the requirement to which those evaporators shall comply. In this case, the evaporator manufacturer or an independent institution shall complete the evaporator certification according to SAE J2911. An example of the latter would be the completion of witness testing by the evaporator manufacturer with the submission of certification documents by the witness organization. Refrigerant R-152a was excluded from this standard because a secondary loop refrigerant system is required. This standard also does not apply to R-134a refrigerant evaporators because it is proven in use.【英文标准名称】:Analysisofsoaps.Quantitativetestmethods.Methodfordeterminationoftotalfreealkalicontent
【原文标准名称】:肥皂分析.第2部分:定量试验方法.第2节:全游离碱含量测定方法
【标准号】:BS1715-2.2-1989
【标准状态】:现行
【国别】:英国
【发布日期】:1989-07-31
【实施或试行日期】:1989-07-31
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:干扰(化学);溶剂萃取方法;肥皂;氢氧化钠;化学分析和试验;碱滴定法;表面活性剂;商业的;氢氧化钾;清洗材料;再现性;试验条件;含量测定;容量分析
【英文主题词】:Alkalimetry;Alkalis;Chemicalanalysisandtesting;Cleaningmaterials;Commercial;Determinationofcontent;Interferences(chemical);Potassiumhydroxide;Reproducibility;Soaps;Sodiumhydroxide;Solventextractionmethods;Surfactants;Testingconditions;Volumetricanalysis
【摘要】:Titrimetricdetermination.Notapplicabletocompoundedproducts,ortocolouredsoapsifthecolourinterferes.
【中国标准分类号】:Y43
【国际标准分类号】:71_100_40
【页数】:4P.;A4
【正文语种】:英语